AUTOMATIC THREAD SUPPLY　【NEW】

This overlocker beautifully sews various stitch types such as overcasting and rolled hemming only by turning the stitch changeover knob to select the stitch type you want to sew. With the automatic thread supply that enables a one-touch setting of thread tensions of four threads (upper and lower looper threads, right-needle thread and left-needle thread), the joy and efficiency of sewing will be greatly increased.

CHAIN-OFF THREAD CUTTER　【NEW】

Chain-off thread can be cut without using a pair of scissors. In addition to the manual cutting of chain-off thread with the handy cut button or the foot switch, automatic cutting is also possible by setting the chain-off thread length.

The automatic chain-off thread-cutting length can be set in 10 steps (from approximately 1 cm to 10 cm).

MICRO-LIFTER　【NEW】

When using the micro-lifter, it is possible to carry out sewing with the presser foot lifted up to 2.5mm. Elastic materials and delicate materials can be sewn beautifully with the presser foot lifted slightly. Micro-lifter dial

The presser foot lifted up to 2.5mm

(Left) Using the micro lifter
(Right) Not using the micro lifter

TRACTOR FOOT【NEW】

This foot smoothly rides up on and down from the multi-layered part of the material while preventing stitch skipping at that part. Use the tractor foot for joining collars, shoulders, bottoms and sleeve cuffs.

EASY TO CHANGE THE SETTINGS　【NEW】

The settings of the maximum sewing speed, automatic chain-off thread cutting length, colour temperature of the LED lights, and the operation of the serger when operated with the foot switch can be changed with ease by means of the LCD screen and operation buttons.

LIGHT CONTROL FUNCTION　【NEW】

In addition to brightness, color temperature of the LED lights can also be adjusted between daylight color and soft white color.
The LED light adjustment functions can also eliminate viewing difficulties caused by the combination of certain fabric and thread colors.

AUTOMATIC NEEDLE THREADER

Even for the needle thread, serger users may want quick threading. With the automatic needle threader, threading is a breeze.

FOOT CONTROLLER WITH FOOT SWITCH FUNCTIONS

With the ability to assign a function to the heel side of the foot controller, you can carry out half-stitch, low-speed stitch or chain-off thread cutting by depressing the heel side of the foot controller.

INNER CURVES OF THE MATERIAL CAN BE SEWN BEAUTIFULLY

The distance between the knife and the needle is 9.95 mm, that is the industry’s smallest level of the knife-to-needle distance. With the supplied curve foot, you can handle the curved portions of the material smoothly and produce beautifully finished seams.

KNEEｰLIFTING LEVER

The presser foot can be moved up and down without using your hands. The presser foot can be lifted to 6 mm at the maximum to ensure easy placement and removal of the material.
※The maximum height of the presser foot with the hand lifter is 8 mm.

MAGNET NEEDLE TRAY

This tray is useful as a place to temporarily put a needle when changing over the sewing method from the 2-needle sewing to 1-needle sewing, or when changing the needle.

ADJUSTABLE STITCH LENGTH/DIFFERENTIAL FEED

Stitch length can be adjusted externally with ease even during sewing by means of the stitch length adjustment dial. Elastic materials can be finished beautifully by adjusting the differential feed adjustment dial. Differential feed can be adjusted even during sewing.

WIDE THROAT AREA

The height of the throat is 2.6″. Due to this height, the usability of the work space improved infinitely.

2-/3-THREAD CONVERSION

It is possible to change over the stitch type to 2-thread sewing by pushing the 2-/3-thread changeover attachment to the left.

MULTI-PURPOSE FOOT

Since the standard presser foot has a hole for attaching tape, the sewing machine is able to sew the material while inserting the stay tape.

WASTE COLLECTOR

Provided as a standard accessory, the waste collector catches cut-off fabric and is useful for keeping the area tidy.

OTHER USEFUL FEATURES

Storage of Accessories

Accessories such as tweezers and a screwdriver can be stored inside the looper cover.